SteamEraa India Private Limited is an Indian manufacturing company specializing in steam engineering products, industrial valves, and innovative solutions for efficient steam management.

Contact Info
Location

Near Indian Tools, Block - J178/1, MIDC, Block Sector: MIDC, Bhosari, Pune - 411026, Maharashtra, India

End Ball Valves

2 Piece Flanged End Ball Valve

Product Nomenclature

  • img Valve Name: 2 Piece Flanged End Ball Valves
  • img Design Standard: IS ISO 17292 / BS 5351
  • img Flow Type: Full Bore / Floating Type
  • img Face to Face: ASME B16.10
  • img Testing: API 598 / IS ISO 17292
  • img Pressure: 150#
  • img Seat Type: PTFE / RPTFE / CFT / GFT / PEEK
  • img Top Mounting: ISO as per ISO 5211
  • img Working Temperature: -40 to 180°C (for standard PTFE)
  • img End Connection: Flanged – B16.5 150#

1] Engineering Dimensions – Hand Lever Operated Valves DN15 to DN150

DN E/E (mm) Bore (mm) PCD (mm) A (mm) L (mm)
DN15 108 12.5 60.3 56 164
DN20 117 19 69.9 61 164
DN25 127 25 79.4 63 200
DN40 165 38 98.4 76 240
DN50 178 50 120.7 86 240
DN65 190 63 139.7 105 320
DN80 203 75 152.4 114 320
DN100 229 100 190.5 132 390
DN125 243 125 215.9 197 390
DN150 267 150 241.3 217 500.5

2] Torque & Weight Data – Hand Lever Operated

DN Range Gearbox Model Weight (kg) Torque (Nm)
DN15–50 GB-05 5.2 12
DN65–80 GB-08 9.0 45
DN100–125 GB-12 15.6 120
DN150–200 GB-16 22.4 280

3] Torque & Weight Data – Hand Lever Operated

DN Hollow Ball Weight (kg) Solid Ball Weight (kg) Torque (Nm)
DN15 4.45 1.40 5
DN20 6.60 1.90 6
DN25 10.50 2.60 10
DN40 13.10 4.65 16
DN50 36.50 71.34 28
DN80 44.30 14.86 60
DN100 — 43.53 110
DN130 — 57.08 260

4] Valve Installation Instructions

  • img Pre-installation: Inspect the valve, clean the pipe, and verify the flange.
  • img Installation: Align the flanges, use the correct gasket, and tighten the bolts evenly.
  • img Bi-directional Flow: Suitable for flow in either direction.

5] Applications

  • img Water
  • img Oil
  • img Gas
  • img Chemical
  • img Steam

Features & Material of Construction

Exploded View – Material of Construction (MOC)

Sr. No. Components Material
1 Body WCB / CF8 / CF8M / Special
2 End Connector WCB / CF8 / CF8M
3 Ball CF8 / CF8M
4 Stem SS304 / SS316
5 Seat PTFE / GFT / CFT / PEEK
6 Body Seal PTFE / GFT / CFT / GRAPHOIL
7 Thrust Washer PTFE / GFT
8 Stem Seal PTFE / GFT / CFT
9 Gland CF8
10 Gland Bushing SS304
11 Handle WCB / CF8
12 Fasteners MS (HT) / SS304
13–14 Anti Static SS304 / SS316

Key Features

  • img ISO Mounting Flange
  • img Anti-Blow Out Stem
  • img Anti-Static Design
  • img Adjustable Push Type Gland
  • img Fire Safe Design
  • img Locking Arrangement

Test Pressure

  • img Body: 32 kg/cm²
  • img Seat: 22.5 kg/cm²
  • img Pneumatic: 6 kg/cm²

Temperature Range – Seat Material

Seat Material Temperature Range Rating
PTFE -40 to 160°C 5 Bar
RPTFE -50 to 200°C 5 Bar
CFT -45 to 220°C 5 Bar
GFT -45 to 220°C 5 Bar
PEEK -50 to 220°C 5 Bar

Top Salient Features

  • img Low torque, low wear, and long service life.
  • img Easy assembly and dismantling with an integral ISO pad.
  • img Push-type gland adjustable without removing the actuator.
  • img Locking arrangement for open/close operation.
  • img Sturdy pipe lever for easy manual operation.
whatsapp