SteamEraa India Private Limited is an Indian manufacturing company specializing in steam engineering products, industrial valves, and innovative solutions for efficient steam management.
SteamEraa India Private Limited is an Indian manufacturing company specializing in steam engineering products, industrial valves, and innovative solutions for efficient steam management.
The STT41 Thermodynamic Steam Trap is designed to automatically discharge condensate & air from steam systems while minimising the loss of live steam. It operates on the thermodynamic principle, using the pressure & velocity differences between condensate & flash steam to control the opening and closing of a disc. The compact, robust construction features a replaceable seat & disc to support maintenance & extend serviceability. An insulation cover is intended to help reduce heat loss & improve steam-holding performance under suitable operating conditions.
| Parameter | Specification |
|---|---|
| Product Name | Thermodynamic Steam Trap |
| Model | STT41 |
| Nominal Sizes | 15NB, 20NB & 25NB |
| Body Material | ASTM A351 Gr. CF8 |
| Operating Principle | Thermodynamic Disc Mechanism |
| Construction | Compact, Robust |
| Nominal Pressure Designation | 600# |
| End Connections | BSP, BSPT, NPT, Socket-weld, Flanged 150#, 300# & 600# (Weld On) |
| Seat Construction | Replaceable Seat & Disc |
| Internal Disc & Seat Materials | Hardened AISI 420 |
| Strainer Screen | AISI 304 |
| Insulation Cover | All-weather Insulation Cover |
Thermodynamic Disc Operation:
Uses pressure and velocity changes during the steam-condensate cycle to provide automatic condensate discharge and steam shut-off.
Replaceable Seat & Disc:
Supports maintenance of the primary working components without automatically requiring replacement of the complete trap; service procedure to be confirmed.
Compact Construction:
Enables installation in steam distribution and condensate drainage lines where space is limited.
Robust Stainless Steel Body:
ASTM A351 CF8 body construction provides corrosion resistance appropriate to compatible industrial steam service.
Extended Steam-Holding Time:
Designed to help reduce unnecessary cycling and live steam loss when correctly sized and operated within the approved pressure range.
Insulation Cover for Outdoor Service:
Helps reduce the influence of wind, rain and ambient heat loss on trap operation, subject to the final cover design.
| Parameter | Specification |
|---|---|
| PMA (Maximum Allowable Pressure) | 48 bar(g) @ 38°C |
| TMA (Maximum Allowable Temperature) | 538°C |
| PMO (Maximum Operating Pressure) | 42 bar(g) |
| Minimum Differential Pressure for Reliable Operation | 0.25 bar |
| Cold Hydro Test Pressure | 72 bar(g) @ RT |
| Outlet Back Pressure | Must remain below 80% of the inlet pressure. |
The STT41 Thermodynamic Steam Trap is intended for consideration in the following industrial steam applications.
Steam Distribution Mains:
Removal of accumulated condensate from steam headers and distribution pipelines.
Steam Main Drip Legs:
Drainage of condensate from low points and designated drainage points in steam lines.
Steam Tracing Systems:
Condensate removal from suitable steam tracing circuits.
Utility Steam Systems:
Condensate management in industrial steam networks.
Outdoor Steam Installations:
Suitable applications where the specified all-weather insulation cover is appropriate for the site conditions.
